MTB hydraulic augers are designed to be used on construction equipment’s ; excavators, back-hoe loaders, tractors, cranes, mini excavators. AGR auger driver is an economical, robust solution for drilling holes for fence posts, poles, foundations and landscaping, with special wear parts and augers, MTB auger packages are tailor made to suit your needs. AGR motor and augers will help you save time, work force and filling material because they’re faster and more sensitive than alternative methods. Special attention is paid to resistance when designing and producing the AGR motor unit.
AGR 5 in the MTB Hydraulic Auger series is produced to be 98 kg with 3250 Nm. output torque for the construction equipment’s in the range of 2-5 tonnes.
| AGR 05 Auger Series | |||
|---|---|---|---|
| Oil Flow | L/min | 25-60 | |
| Gpm | 6,6-15,8 | ||
| Operating Pressure | Bar | 240- | |
| Psi | 3500- | ||
| Mini Excavator Carrier Weight |
Ton | 2 - 5 | |
| 1000 Lb | 4400 - 11000 | ||
| Revolutions | Rpm | 35 - 85 | |
| Output Shaft | Mm | 57 | |
| Output Torque | Nm | 3250 | |
| Auger Driver | Kg | 98 | |
